Technical Data: Base: 1 C.-Polyoxypropylene Density: 1,06 g/cm³ Viscosity adhesive: Pasty Stability/Run-off (ASTM D 222): < 1 mm Processing temperature: +5 to +40 °C Cure type: By humidity Curing condition: +5 to +40°C and 30% to 95% rel. humidity Skin-overtime*: 10 min.

Curing speed ( first 24h): 2-3 min. Volume change (DIN 52451): -1 % Gap filling up to max.: 5 mm Gap width up to max.: 25 mm Shelf life (+5°C to +25°C / +41°F to +77°F): 12 Monate Shore A hardness (DIN 5355 / ASTM D 224) ± 5: 40 Elongation at break (DIN 53504/ASTM D 2240) ± 5: 300 % Tensile strength of pure adhesive and sealant: 3,0 N/mm² Average tensile shear strength (DIN EN 1465/ ASTM D 12): 2,0 N/mm² Specific resistance: 1,2 x 10^12 Ohm/cm Tear strength (DIN 53515/ASTM D 1002): 19 N/mm² Movement capacity max.: 20 % Overpaintable (liquid paint) - only “wet in wet“, within 3 hrs. at the latest after material app Building material category (DIN 412): B 2 Specific forward resistance: 1,2 x 10^12 Ohm/cm Temperature resistance: 40 to +90 briefly (approx.

2 h) to +120 °C Application methodsProfessional cartridge gun for 310 ml cartridges, compressed airgun (we recommend a variation with piston rod), automatic dosingsystems.Joining the parts to be bondedTo ensure optimal wetting, the parts must be joined before the firstskin has been formed on the adhesive (skin-overtime).